HT160-DC
Lifting Stages
Precision vertical lift stage (ball screw), travel 16 mm, rep ± 0.7 µm, load 5 kg, speed 16.6 mm/s
High precision lifting stage
The lifting stage HT160 is suitable for high precision vertical movements. The combination of geared motors and a precise ball screw enables very small adjustment increments with high loads.
Combinable with PMT and PLT series
Equipped with stepper motor or DC motor and cross roller bearings, the HT160 has been developed to fit the PMT160 and PLT series, ensuring versatile combination possibilities for challenging multi-axis systems.
Versatile possibilities for use
This lifting stage is primarily used in measurement engineering, sensor positioning, in the optical field or in micromachining. It is also available in a vacuum version for applications in research and development.
| Modell HT160 | -16-DC-R | -16-DC-L | |
| Travel | [mm] | 16 | 16 |
| Repeatability unidirectional | [μm] | ± 1.6 | ± 0.7 |
| Repeatability bidirectional | [μm] | ± 2.6 | ± 1.2 |
| Accuracy | [μm] | ± 7.1 | ± 3 |
| Flatness | [μm] | ± 0.8 | ± 0.8 |
| Straightness | [μm] | ± 0.8 | ± 0.8 |
| Positioning speed | [mm/s] | 8.3 | 8.3 |
| Max. speed | [mm/s] | 16.6 | 16.6 |
| Max. acceleration | [m/s2] | 0.2 | 0.2 |
| Max. load Fx | [N] | 50 | 50 |
| Max. load Fy | [N] | 50 | 50 |
| Max. load Fz | [N] | 45 | 45 |
| Max. Torque Mx | [Nm] | 1.7 | 1.7 |
| Max. Torque My | [Nm] | 1.8 | 1.8 |
| Max. Torque My | [Nm] | 1.6 | 1.6 |
| Pitch | [µrad] | ± 40 | ± 40 |
| Yaw | [µrad] | ± 20 | ± 20 |
| Resolution | [μm] | 0.042 | 0.1 |
| Weight | [kg] | 4.5 | 4.5 |
FMC400/450
Multi-axis controller fully ready for tracking, simple creation of own programs.
PLC
We support integration of our systems into PLC architectures, e.g. Beckhoff
FMC250/280
Multi-axis controller with increased current and voltage for point-to-point positioning.
ACS
We support integration of our systems into your ACS environment
FMC220
Versatile combinable controller, ideal for laboratory applications, control of 1 - 128 axes simultaneously
Are you looking for a technical solution for your application?
Get your first 3D Design in a few days:
Katja Weißbach
Consulting
T +49 351 88585-64
E-Mail
Ronald Schulze
Consulting, Project Management & Engineering
T +49 351 88585-67
E-Mail
Francisco Samuel
Consulting &
Project Management
T +49 351 88585-85
E-Mail
Elger Matthes
Consulting, Concepts, Innovation & Engineering
T +49 351 88585-82
E-Mail
Our references
