MP53-3-PM
Stages and Axes

Art. ID 212382

High resolution micropositioner

HV / UHV / EUV, 10 mm travel, 0.2 µm repeatability, 0.5 kg load

  • Vacuum: all ranges HV / UHV / EUV
  • Lubrication liquid up to 10-8 / dry up to 10-11 mbar
  • Max. Bakeout temperature: 120°C
Optionally configurable:
  • Available as magnetic, low-magnetic and magnet-free version
  • Optionally with high-resolution measuring system for repeatability up to 0.005 µm
  • Combinable with rotary stages for rotary applications
  • Individual adaptation to the installation situation in the chamber
  • Versions for clean room ISO 14644-1 (up to class 1 on request)
  • Optional with Controller FMC400/450

Miniaturized XYZ manipulator for demanding applications

The MP53 manipulator is a miniaturized 3-axis system for X, Y and Z motion in very limited installation space. Travel ranges of 10 mm are realized. The manipulator is equipped with piezo motors and can thus realize positioning increments of a few nanometers for high-precision applications in high vacuum and ultra-high vacuum.

 

Application areas

Precision positioning on smallest installation space for laboratory applications, microscopy and semiconductor technology, research in ultra-high vacuum and under extreme ultraviolet radiation, sample preparation, sample scan, sample handling, camera adjustment, sensor adjustment, material research, material analysis, beamline, accelerator, synchrotron, miniaturization

MP-53-3-10-PM-L
Travel[mm] 10
Repeatability unidirectional[µm]± 0.2
Repeatability bidirectional[µm]± 0.3
Positioning speed[mm/s]5
Max. load Fx[N]5
Max. load Fy[N]5
Max. load Fz[N]5
MotorPiezo Motor
FeedbackLinear Scale
GuideCross roller Stainless steel, hybrid, optional full ceramic
Length[mm]90
Width[mm]55
Height[mm]60
Vacuum[mbar]up to 10-11  HV/UHV/EUV
Lubrication liquic[mbar]up to 10-8
Lubrication dry[mbar]up to 10-11
Max. bakeout temperature[deg]120
Magnetism Variantsmagnetic | low-magnetic | magnet-free

 

Specifications are subject to change. Values are for the single axis with our controller. Parameters shown here are typical values for a standard configuration. By customization and given in depth knowledge of your application significantly improved values can be achieved.


    1. Your customized system



    1. Your contact details
    1. *lease read our data protection regulations here before sending the contact form.

Contact Person for Vacuum Custom Systems

Dipl.-Ing. Elger Matthes

Phone: +49 (0) 351 88585-0

elger.matthes(at)steinmeyer.com