The FCM280 is very similar to the FMC220 with respect to its hardware, however, it distinguishes itself with significantly higher currents and a slightly higher voltage. Both systems are identical from a system interface and programming point of view.
In contrast to FCM220, this controller is supplied in a 19 inch rack. A linear fault compensation is optionally available.
The FCM250/280 are especially suited for our larger XY-tables such as KT470 and higher, as well as tables from the PLT-series if maximum speeds are not required. This controller is also integrated in the quick-access software.
|Description||FMC 250||FMC 280|
|Max. Number of Axes||9 (128)||9 (128)|
|Stepper Motor SM||yes||yes|
|Brush Motor DC||yes||yes|
|Servomotor AC / BLDC||liwithed speed||liwithed speed|
|Linear Motor ironless EDLM||liwithed speed||yes|
|Linear Motor iron DLM||no||liwithed speed|
|Nanomotion Piezo NM||no||no|
|Max. Motor Voltage||24V … 48V||24V … 80V|
|Max. Motor Continuous Current||8A||10A|
|Dual loop Encoder||yes||yes|
|Max. Encoder Input Digital||40Mhz||40Mhz|
|Max. Encoder Input Analog||450kHz||450kHz|
|Compensation||optional, linear, with adapted Firmware||optional, linear, with adapted Firmware|
|RS232, USB||yes, yes||yes, yes|
|BUS||CAN, EtherCAT||CAN, EtherCAT|
|I/O (z.B. for Brake)||(2 in, 2 out) per axes, Joystick||(2 in, 2 out) per axes, Joystick|
|STM Quick Access||yes||yes|
|Safe Torque Off||optional||yes|
|Safe Speed Control||no||optional|
|Housing||19“ Rack 3HE||19“ Rack 3HE|